Save Thousands over the Life of Your Spa
- Multi stage insulation system – stopping heat loss through the shell, cabinet, base and top.
- Minimal gaps around the cabinet – trapping heat in and cold air out
- Energy smart control system with power saving features
- Controller is Smart Meter ready (can do heating and filtration on off peak power)
- Larger heater – water heats quicker so circulation pump turns off quicker
- Controller is heat pump compatible – fit a heat pump and save 75% on running costs
- Energy efficient filtration pump – only runs 4 hours a day not 24 hours
No other spas have all 7 power saving features.
Better Insulation Means Lower Running Costs
Other than fitting a heat pump, it has been proven that the most effective way to reduce spa running costs is to insulate it well.
Our 8 layer insulation system locks in the heat
Every Oasis Spa has 8 layers of insulation on the base, cabinet, top and (most importantly) the shell of your spa. This exclusive multi-layer insulation system with (thermo lock barrier) keeps out the cold and traps in the heat from your pump and spa water, saving you thousands of dollars over the life of your spa.
Insulation is crucial if you plan to heat your swim spa
Due to the sheer volume of water involved, it is imperative that the cabinet of your swim spa is well insulated. Our 8 layer insulation system is specifically designed to stop heat loss through the base, sides, shell and top of your spa, which is just one reason why our swim spas are cheaper to run.
Custom fit “no gap” cabinets stop heat loss
Hot air rises naturally. If your spa has large gaps between the cabinet and the spa shell, the heat inside the cabinet escapes and cold air enters your spa, causing the heater to turn on more often to maintain heat. Pests and insects can also enter and damage your spa. We tailor make every cabinet so there are minimal gaps, trapping the heat in. Without this feature you are simply throwing money away.
Our insulated wrap-around base helps too!
A spa with no base and/or poor insulation will lose a lot of its heat into the cold ground below. Oasis Swim Spas feature a wrap-around ABS base to seal your spa from the elements, using multiple layers of insulation to stop heat loss and save you money.
Keep Running Costs Down
Every Oasis Spa is heat pump and gas heater ready
In most cases, our unique insulation system makes electricity the most convenient and affordable way to heat your spa. For very large spas and swim spas, in cold climates and in the future, heat pumps will be the most economical solution. Every Oasis Spa has the control system, pump and connections already in place, so you can connect a gas heater or heat pump at any time and start heating your spa at a fraction of the cost.
Our spa controller will cut your power bill
Our state-of-the-art spa controllers with “intelligent thermal tuning” learn how to minimize heating and pump running times, reducing running costs by up to 20%. Handy “eco”, “weekend” and “away” modes provide other ways to suit your individual needs and save you money.
You can heat and filter using off-peak power
Only a handful of brands worldwide have all 5 power saving features. While one brand uses a slightly more efficient pump for filtration, this pump offers a less powerful massage. As our insulation system is superior, Oasis Spas are cheaper to run without compromising your massage experience.
Connect a heat pump and slash heating costs
Our integrated heat pump technology allows you to control a heat pump from your spa touchpad. Heat pumps save up to 75% on heating costs by transfering heat from the air into your spa water, turning every kilowatt of power into 5 kilowatts of heat. As a bonus, they even cool the water in summer, offering total temperature control with minimal cost.
Our filtration pumps are energy efficient
Our “energy smart” filtration pumps use up to 60% less power than 2 speed and other filtration pumps and only have to run 4 hours a day (not 24 hours a day).